How can I undo a complete system restore in Windows XP – How do you reset Windows XP to its original state

If your Windows XP computer is running slow or you are experiencing other problems, you may want to reset it to factory settings. Doing this will erase all of your personal data, so be sure to back up any important files before proceeding.

To reset your Windows XP computer to factory settings:

  1. Insert the Windows XP CD into your CD drive and restart your computer.
  2. When prompted, press any key to boot from the CD.
  3. At the Welcome to Setup screen, press Enter to begin the installation process.
  4. Press Ft the License Agreement screen to agree to the terms and continue.
  5. Choose the Repair option at the next screen. This will take you into Recovery Console mode.
  6. ype “cd \windows\system32\restore” (without quotation marks) and press Enter . This will change the directory so that we can access the restore folder where a copy of your original system files are stored.. If you have multiple operating systems installed on your computer, use “cd \windows\system32\restore” instead so that you can access Restore for each individual installations.. For more information about using Recovery Console see this article: What is Recovery Console and How Do I Use It?):http://www.bleepingcomputer…ticle14464&f= o delete all restore points type in “rmdir /s %systemroot%\System Volume Information” then type “exit” when done.. ow we need tell Windows where to install itself by typing in “format c:\”.

How do you reset Windows XP to its original state?

Resetting Windows XP to its factory settings is a simple process that can help you restore your computer to its original configuration. To reset your computer, follow these steps:

How do you reset windows xp to its original state? Resetting Windows XP to its factory settings is a simple process that can help you restore your computer to its original configuration

To reset your computer, follow these steps:

  1. Click the Start button and then click Control Panel. Double-click System and Security Under System and Security, click Restart On the Advanced tab, select the Safe Mode or Recovery mode check box Click OK When prompted, choose an option to restart your computer After your computer restarts, press Fo open the boot menu Select Repair Your Computer At the prompt, type in C:\WINDOWS\system32\config Press Enter In the System Configuration window, click Default Settings In the Startup Options window, under Boot Order, under Normal Boot, under Safe Boot, under Networking, under System, under Hardware, under Windows Update20,. Under Troubleshooting21,. Under Performance22,. Under Appearance23,. Under General2.Under Keyboard2.Under Mouse2.Under Sound2.under Regional Settings2.under Date and Time2.under Power3..
  2. Click the Start button and then click Control Panel
  3. Double-click System and Security
  4. Under System and Security, click Restart
  5. On the Advanced tab, select the Safe Mode or Recovery mode check box
  6. Click OK
  7. When prompted, choose an option to restart your computer
  8. After your computer restarts , press Fo open the boot menu
  9. Select Repair Your Computer
  10. At the prompt , type in C:\WINDOWS\system32\config \ (where C:\WINDOWS is replaced with where you installed Windows XP ) \ (note : this path may be different if you installed Windows XP on a different drive than C:\ ) \ (note : don’t include any spaces between “C:” and “/”) \ (note : double quotes are necessary around “system32” because it’s a path name not a file name ) \ config . exe . If prompted for an administrator password , enter it now . If prompted for confirmation , press Y or Enter . Note : The default location of system3ill change depending on which edition of Windows XP you are using ; see below for more information about editions of Windows XP .
  11. Press Enter
  12. In the System Configuration window , click Default Settings
  13. In the Startup Options window , under Boot Order , select Normal Boot
  14. , under Safe Boot , select Disabled [or] if Enabled is not selected in step bove but was previously set as desired by user intervention during installation or use of software such as Norton Antivirus or other security programs ; deselect it now by selecting Enabled from this list instead ] [or] if Disabled is not selected in step bove but was previously set as desired by user intervention during installation or use of software such as Norton Antivirus or other security programs ; deselect it now by selecting Enabled from this list instead ] [or] if Unable To Determine Which Option Should Be Used For This Computer – This message appears when there may be conflicts between various startup options enabled on this machine; try enabling some of them one at a time until one works correctly ] [or] if Automatic reboot after failed startup attempt has been disabled ; enable it now by selecting Automatically Reboot After Failed Startup Attempts from this list ] [or] if Automatic reboot after failed startup attempt has been enabled ; disable it now by selecting Automatically Reboot After Failed Startup Attempts from this list ] [or] if Do Not Auto Reboot During Failed/Failed Starts Up has been disabled ; enable it now by selecting Do Not Auto Reboot During Failed/Failed Starts Up from this list ] [Note: If You Are Using A Microsoft Management Console (MMC), You Must Enable One Of These Options Before proceeding Any Further!]: , under Safe Boot ], select Disabled ]. If Enabled is not selected in step bove but was previously set as desired by user intervention during installation or use of software such as Norton Antivirus or other security programs; deselect itnowbyselectingEnabledfromthislistinstead].IfDisabledisnotselectedinthesetupoptionswindowbutwaspreviouslysetasdesiredbyuserinterventionduringinstallationortouseofthesoftwarealsounternationalsecurityprograms;deselectitnowbyselectiontoadesktopfromthislist.]IfUNABLETO DETERMINE WHICH OPTION SHOULD BE USED FOR THIS COMPUTER – THIS MESSAGE APPEARS WHEN THERE MAY BE CONFLICTS BETWEEN VARIOUS STARTUP OPTIONS ENABLED ON THIS MACHINE; TRY ENABLING SOME OF THEM ONE AT A TIME UNTIL ONE WORKS CORRECTLY.][OR][IF AUTOMATIC REBOOT AFTER FAILED STARTABILITY ATTEMPT HAS BEEN DISABLED;enableitnowbyselectiontoadesktopfromthisslideshow.][OR][IF AUTOMATIC REBOOT AFTER FAILED STARTABILITY ATTEMPT HAS BEEN ENABLED;disableitnowbyselectiontoadesktopfromthisslideshow.][OR][DO NOT AUTO REBOOT DURING FAILED/FAILED STARTS UP HAS BEEN DISABLED;enableitnowbyselectiontoafoundationslideshow.

What are the steps to factory reset Windows XP?

1. Boot your computer into Safe Mode with Networking2. Click on Start, then Control Panel3. Under System and Security, click on Restart4. On the screen that appears, select Troubleshoot5. Click on Advanced Options6. In the Startup Settings box, select Normal7. Click on Restart8. When your computer restarts, it will enter Safe Mode with Networking again9. Follow the instructions that appear to reset Windows XP10.

How do I return Windows XP to its default settings?

Windows XP can be reset to its factory settings by following these steps:1. Open the Start menu and select “All Programs”2. Select “Windows Update”3. Click on the “Check for Updates” button4. If there are any updates available, click on the “Install Updates” button5. When the updates are installed, click on the “Restart Now” button6. After Windows has restarted, select “Startup Settings”7. Under the General tab, click on the “Reset this PC” button8. Follow the prompts to complete the reset9. When prompted to enter a password or user name, type in your original Windows XP password or user name10. Click on Finish11. Restart your computer12. Once it is restarted, you will be prompted to log in again13. Choose to use your original account (or create a new one)14. Click on OK15. Your computer will now start up with its default settings16.- To access Windows Update again later, open the Start menu and select “All Programs”17.- Select “Windows Update”18.- Click on the “Check for Updates” button19.- If there are any updates available, install them20.- When finished installing updates, click on the “Restart Now” button21- After Windows has restarted choose Startup Settings22- Under General tab click Reset This PC23- Follow prompts24- Enter password or user name25- Click Finish26- Restart computer27- Log in as usual28.

Is it possible toreset Windows XP to factory settings?

Yes, it is possible to reset Windows XP to factory settings. This guide will show you how to do this.First, make sure that you have a copy of the original installation media for your Windows XP system. You can find this media on a CD or DVD that came with your computer, or you can download it from Microsoft’s website.Next, boot your computer from the installation media. When the PC starts up, click on the “Start” button and then select “Settings.” Under “System,” click on “Advanced System Settings.” In the “Advanced Options” window, click on “Reset Windows XP.” Click on “Yes” to confirm the reset operation.If you are using a desktop PC, connect an external hard drive to it and boot your computer from that drive instead of from the installation media. When the PC starts up, click on the “Start” button and then select “Settings.” Under “System,” click in Advanced System Settings under System Protection tab and then under Reset options checkmark box next to Reset my computer back to its original state (factory default).

What does a clean install of WindowsXP mean and how do I perform one?

A clean install of Windows XP means starting from scratch, reinstalling all the software and files you need, and restoring your computer to its factory settings. This is a more comprehensive approach than just resetting your computer to its original settings, which merely restores your computer to the state it was in when you first bought it. A clean install is recommended for people who want to start fresh with their PC and get rid of any installed programs or data that they don’t want or need.